The Flexxifinger® Pulse Crop Lifter™ was originally designed for straight combining in desiccated crops like peas, lentils and edible beans where cutting close to the ground is required. The lifter rail hugs the guard and the replaceable nylon finger is held in an adjustable receptor, allowing the combine operator to fine-tune the location of the lifter’s forward lifting point for his specific conditions. The finger extends beyond the finger receptor and becomes a tail that guides the plant material over the knife.
Benefits
Usage
Crop type: peas, lentils, chickpeas, black beans, pinto beans, soy beans, white beans
Generally, the recommended spacing is one lifter per foot across the header. Harvesting some row or bedded crops, where lifters mounted to the row or a combination of different Flexxifinger® lifters to maximize recovery have proven beneficial.
The 33048 nylon finger (2.75”/70mm) is recommended when cutting within 1.25” (30mm) of the ground. The 33050 nylon finger (4.75”/120mm) is recommended when cutting within 1.5” to 2.5” (30-60mm) of the ground. Please contact us to assist with determining the best choice for your crop.
** Some or all of these components are made of steel, therefore care must be exercised by the combine operator to minimize possible damage to the header/ combine.**
70060 “N” Pulse Crop Lifter
- Fits guard length more than 5.75” (146mm) long*
- Gold-coloured receptor is .625” (16mm) diameter
- Attaches to the header using QD™ technology
- QD™ Nut Assembly included**
- Uses either the 33048 or 33050 nylon finger, sold separately
70062 “J” Pulse Crop Lifter
- Fits guard length shorter than 5.75”(146mm) long*
- Gold-coloured receptor is .625” (16mm) diameter
- Attaches to the header using QD™ technology
- QD™ Nut Assembly included**
- Uses either the 33048 or 33050 nylon finger, sold separately
Compatible Nylon Fingers:
33048 Nylon Finger (0.625” x 2.75”/16mm x 70mm)
- Forward lifting point that is 2.75”(16mm) long
- Leaves approximately 1.5” (38mm) of stubble
- 7” (178mm) tail
33050 Nylon Finger (0.625” x 4.75”/16mm x 120mm)
- Forward lifting point that is 4.75”(120mm) long
- Leaves approximately 1-1/2” to 2-3/4” (38mm to 70mm) of stubble
- 7” (178mm) tail
*Please refer to our fitting chart for more details
**Additional carriage bolts 32310, 32312 or 32314 may be required for specific model headers. Please contact our Product Support team for more details.
