Flexxifinger® Triple S™ Series
Triple S™ series fits all systems that have a guard finger in front of the knife because of a universal-fit rail that attaches to the header. The unique eyestrap method of attaching the lifter’s arm and riser to the rail creates a highly adjustable product that can be angled to suit your header or crop type and will allow the lifters to be configured on the header to work in unison. As with all Flexxifinger crop lifters, the Triple S™ crop lifters use our patented QD™ attaching and detaching technology and can be removed and or installed in 3 – 5 minutes per header, after the initial installation.
Flexxifinger® uses the same patented QD™ technology on all its lifters, which makes it possible to quickly interchange different Flexxifinger® lifters on the same header without the need for removing the guard bolt each time.
The Triple S™ HighLift™ is used in tall, heavy crops. The Triple S™ HighLift™ is recommended for auger headers and generally leaves a 75mm-100mm (3”-4”) stubble. This series will lift the heads higher above the knife than the MidCut™ or European™ and will help stand the crop up in front of the auger for more efficient threshing. With the Triple S™ HighLift™, you can achieve higher ground speeds in most situations. The adjustable tail length allows you to customize the lifter to suit your crop and field conditions, and provides adjustments that can be helpful on “Vario” style headers.
Benefits
Usage
Crop type: cereals, oilseed, forage and other specialty crops
Generally, the recommended spacing is one lifter per foot across the header. Harvesting some row or bedded crops, where lifters mounted to the row or a combination of different Flexxifinger® lifters to maximize recovery have proven beneficial.
** Some or all of these components are made of steel, therefore care must be exercised by the combine operator to minimize possible damage to the header/ combine.**
Optional Accessories
32310 Carriage BoltThis Carriage bolt is for select headers that have a poly skid plate held on by a 7/16” (11mm) carriage step bolt from under the header, which tapers to 10mm in order to mount the QD™ nut assembly.
This Carriage bolt is for a header that uses a 7/16” (11mm) carriage bolt from under the header, which tapers to 10mm in order to mount the QD™ nut assembly.
This Carriage bolt is used on a header that has a 10mm guard bolt from under the header, in order to mount the QD™ nut assembly.
On headers that have 4”(100mm) spacing between the guards, there will be instances where the guard bolts do not line up with the guard point, making the installation of a lifter at specific intervals impossible.
