The Flexxifinger® DFO™ Crop Lifter™ is designed for use on auger headers and is used for harvesting a variety of different crops including peas, cereals, oilseed, and other specialty crops. The lifter rail hugs the guard and the replaceable nylon finger is held in an adjustable receptor, allowing the combine operator to fine-tune the location of the lifter's forward lifting point for his specific conditions. The receptor is outfitted with a spring-steel tail which stands the crop up in front of the auger, optimizing crop flow into the machine allowing increased ground speeds.
Crop type: peas, cereals, oilseed, and other specialty crops
Generally, the recommended spacing is one lifter per foot across the header. Harvesting some row or bedded crops, where lifters mounted to the row or a combination of different Flexxifinger® lifters to maximize recovery have proven beneficial.
The 33064P nylon finger is included with the DFO™ lifter, however this finger is interchangeable with other Flexxifinger® HD nylon fingers. Please refer to specifications tab for additional product information.
** Some or all of these components are made of steel, therefore care must be exercised by the combine operator to minimize possible damage to the header/ combine.**